Publicité
ASSEMBLY
WARNING!
There are several areas during the assembly process that special attention
must be paid. It is very important to follow the assembly instructions correctly
and to make sure all parts are firmly tightened. If the assembly instructions are
not followed correctly, the equipment could have parts that are not tightened
and will seem loose and may cause irritating noises. To prevent damage to the
equipment, the assembly instructions must be reviewed and corrective actions
should be taken.
UNPACKING
Unpack the equipment where you will be using it. Place the carton on a
level flat surface. It is recommended that you place a protective covering on
your floor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded. If you have difficulty, a light application of lithium grease
is recommended.
WARNING!
Our equipment is heavy, use care and additional help if necessary when
moving. Failure to follow these instructions could result in injury.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer
Tech Support. Contact information is located on the back cover of this
Owner's Manual.
ENGLISH
SERIAL NUMBER LOCATION
Before proceeding, find your serial number located on a barcode sticker and
enter it in the space provided below.
SERIAL NUMBER
MODEL NAME
VISION 300-VKR
* Use the information above when calling for service.
7
Publicité
