Publicité
HP 4006 HP 6006 HP 8006 HP 10006 HP 4566
Model
HP 4006
HP 6006
HP 8006
HP 10006
INSTALLATION AND ASSEMBLY
Users can only change the silicone sealing ring and regulator weight if they are broken, in accordance with
installation and assembly instructions. Any other repairs must be exclusively made by persons duly
authorized for this purpose.
Changing the Silicone Sealing Ring
a. Remove the old sealing ring from the lid as indicated in the pictures below.
b. Place the new sealing ring on the lid and make sure it is in the correct position, i.e. below the
position indicating point as shown in the following photos:
Capacity
Working Pressure
4L
6L
8L
10L
Safety Valve
60/110KPA
60/110KPA
60/110KPA
60/110KPA
Safety Window
120-160kPa
120-160kPa
120-160kPa
120-160kPa
Pressure
180-300kPa
180-300kPa
180-300kPa
180-300kPa
16
Publicité
