Télécharger Imprimer la page

Leatt 3DF AIRFIT EVO BACK PROTECTOR Mode D'emploi page 6

Masquer les pouces Voir aussi pour 3DF AIRFIT EVO BACK PROTECTOR:

Publicité

Marking and labeling
The following diagrams provide important information about this product and the protection it provides.
The "CE " mark denotes
compliance with the health
and safety requirements of
Annex II of the European
Personal Protective Equipment
Regulation 2016/425.
The recommendation to
read the manufacturer's
instructions contained in
this booklet
Cleaning
Always follow the washing instructions printed on the label attached to the garments, since when alternative
fabrics with specific performance characteristics are used, washing instructions may differ. Touch-and-close
fastenings, where fitted, can be cleared of debris using a nail brush. If the protector components have become
soiled in use, wipe the surface with a damp cloth. Use a soft brush, damped in water, to clean the perforations
in the components. Only use tap water. Never use cleaners or detergents, or launder the protector, the product
will be damaged by the cleaning process and chemicals and the level of protection provided severely reduced.
Common substances applied to this product (solvent, cleaners, hair tonics, etc.) can cause damage that may be
invisible to the user and compromise the effectiveness/safety of your Leatt ® product. If in any doubt, please
contact the manufacturer before cleaning or laundering your protector. Always refer to the material content
label on the Leatt ® product. None of the materials used in the construction of the product are known to contain
anything that is harmful or might cause an allergic reaction or be dangerous to health.
Do not
Wash
Storage and transportation
Place the Leatt ® product on a clean, dry surface and store in a dry, well-ventilated environment away from
direct sunlight and extreme temperature. Do not place heavy objects on top of Leatt ® product as this can
damage the fabrics and plastic materials. The protection provided by your Leatt ® product should not be
affected by non-extreme ambient temperature and weather conditions.
6
No
No bleach
tumble dry
zodlmU
FB
2
Dry in
Do not
shade
iron
solvents
Copyright © 2023, Leatt ® Corporation
Denotes that the product
is or incorporates a back
protector ("FB") which
meets level 2 of European
Standard EN 1621-2:2014
No

Publicité

loading