Publicité
Caution! Again be sure the
tent pegs are securely an-
chored.
Step 8
Secure the side walls (9, 11) to the
pavilion corner poles / telescoping
poles (15) and crossbars (14) using
the factory installed hook and loop
fasteners (12) (Fig. H).
Note! When fastening be sure
the wrapped seam on the
edges of the side walls faces
inward.
Step 9
Secure the factory installed hook
and loop fasteners to the roof bars
(16) (Fig. I).
Dismantling
Step 1
Remove the side walls.
Step 2
Remove the tent pegs for the guy
lines and base plates.
Step 3
Press in the locking pins on the tele-
scoping feet to slide in the feet.
Step 4
Press in the locking pins on the cor-
ners joints to slide the corner joints
down.
Caution! Pinching hazard!
18
GB/IE
Step 5
Slowly and carefully push the
folding frame together toward the
opposite sides.
Step 6
Store the dry and cleaned article in
the storage bag.
Storage
When not in use, always store the
product clean and dry at room
temperature.
Cleaning and Care
Clean the article with a damp cloth
and a mild cleaning agent.
Do not use petrol, solvents or harsh
cleaners. The pavilion roof may be
treated with a waterproofing spray.
Disposal
Dispose of the article and the pack-
aging materials in accordance with
current local regulations. Packaging
materials such as foil bags are not
suitable to be given to children.
Keep the packaging materials out of
the reach of children.
Dispose of the products and the
packaging in an environmental-
ly friendly manner.
Publicité
