Publicité
MAINTENANCE
IMPORTANT: always ensure the cleaner has fully cooled down before performing
any maintenance tasks.
EMPTY THE WATER TANK
1.
Unplug the cleaner from the main power and ensure the unit has cooled.
2.
Remove the clean water tank for the main body of the cleaner.
3.
Press the release button and remove.
4.
Empty any excess water from the tank. Replace the cap and return to
the cleaner.
CLEANING FAQS
Wh
When is steam ready?
In approximately 25 seconds.
Can I use steam on all surfaces?
On all hard floors and surfaces like marble, ceramic, stone, linoleum, sealed
hardwood floors and parquet. Always test on a small patch to be certain.
Do
Does steam emit automatically?
No, to produce steam you should press the steam release button under the
handle.
Can I use it vertically?
Yes, the Pronto 200CS can be used vertically for surfaces and hard to reach
areas.
Can I put detergents or other chemicals inside the tank?
No, it will damage the product.
What if where I live the water is very hard?
You can use distilled water.
7
Publicité
