Publicité
Connecting Your Speakers
Always turn off your amplifier or receiver before making any connections.
■ Preparing Your Speaker Cables
Carefully remove 15 mm of insulation from both ends of your speaker cables and twist the bare wires
tightly, as shown.
15 mm
Good
No Good
Tighten
Loosen
Red (+)
Black (–)
Note: The rear panel of
various amplifiers may
differ in appearance.
Notes:
• Make sure that the bare wires are not touching each other as this
could damage the speaker and amplifier.
• Connect one speaker to the left terminals of your amplifier, and
another speaker to the right terminals, making sure not to reverse the
polarity (+, –). If one speaker is connected with reversed polarity, the
sound will be unnatural and lack bass.
Front speakers <NS-LC8>
L
R
<4m>
<4m>
FRONT
R
A
B
Red
Center speaker
Surround speakers
R
<10m>
SPEAKERS
REAR
L
R
L
(SURROUND)
CENT ER
CENT ER
REAR
CENT ER
<4m>
Black
<NS-CLC8>
<NS-ELC8>
L
<10m>
5
E-
Publicité
