Adjusting The Wheels - Makita DT 2000 Instructions De Montage

schematic diagram

Adjusting the wheels

The wheel spacing on the guide trolley may be adjusted if
necessary. To be able to cut very closely to obstacles (e.g.
kerbstones, masonry, walls, etc.), mount the power cut with
the cutting device in the outer position (see operating instruc-
tions for the power cut) on the guide trolley.
Loose screws (1) of the axle fixing and push wheel axle right
over to the left.
1
Tighten screws (1) firmly.
L
9