Publicité
18
Single select 15 channel remote
Single select makes it possible to activate program mode on a single blind through a
remote control, without having to physically press the program button on the blind.
To activate Single
18.1
select simultaneously
hold the centre
button and press the
pair button.
1
1
Once a blind is found
18.3
the channel number
will flash and the
blind starts stepping,
indicating that
program mode has
been activated. The
blind can now be (un)
paired to the remote
and/or programmed.
MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR
11
+
1
1
1
To search for
18.4
the next blind
press the right
button. Search
mode will be
activated.
To find the
previous blind
press the left
button.
1
The remote starts
18.2
searching for blinds
(search mode). This
is indicated by the
horizontal bars on the
remote.
1
To exit Single
18.5
select press
the right
button during
search mode.
The display
shows the
letter O.
1
Publicité
