Transport And Storage; Conditions Of Use - Festo Quickstepper FSS-12-C Notice D'utilisation

Quickstepper
According to the order of the switch steps, only one output is active at a time while
the other outputs are exhausted.
You can control a superordinate signal Emergency stop and the preselects Auto
matic/manual, Continuous cycle/Single cycle of the sequence controller via the
Festo Commander FSSC−12 or via external buttons and logical elements.
3 Application
The Quickstepper has been designed as a step switcher with 12 steps and start
links. It can be used with a pneumatic command module, e.g. the Commander
FSSC−12, as a pneumatic compact controller in machine controllers.
4

Transport and storage

Ensure storage conditions as follows: Short storage periods in cool, dry, shaded
and corrosion−protected locations.
5

Conditions of use

Warning
S Malfunctioning will occur if the device is not used correctly.
S Make sure that the specifications in this chapter are always observed. Only in
this way can you ensure that the product functions correctly and reliably.
Compare the maximum values in these
S
operating instructions with your current
application (e.g. pressures, tempera
tures). Only if the loading limits are ob
served can the product be operated in
accordance with the relevant safety
guidelines.
22
[°C] [%]
Fig. 4
Festo FSS−12−C 0410a English
[bar]