Festo Quickstepper FSS-12-C Notice D'utilisation page 19

Quickstepper
Quickstepper FSS−12−C
1 Operating parts and connections
1
2
3
1
Retaining bars for attaching a lockable
protective cap IP54.
2
Step counter 1...12 counts in ascending
order. Max. 12 steps and as many
movements as you like. Multiple
movements can be controlled at the same
time in one step.
3
Lock fastening for lockable protective cap
(Fig. 10).
4
p: White display for operating pressure.
As long as the output assigned to the step
displayed is pressurised, the display will be
visible (pin protrudes).
Fig. 1: Operating parts
Festo FSS−12−C 0410a English
5
Input: Blue common display for
acknowledgements (feedback signals).
Acknowledgement signal of the movement
last executed (pin protrudes)
6
Man.Step: Button for selecting any step in
setup mode or for typing through the work
sequence in step mode.
7
Output: The Festo Quickstepper's outputs
can be switched on or off. The outputs are
disabled when in the 0 switch position. You
can connect through the controller
manually. The selected step is activated
first. When in the 1 switch position, the
output activated is pressurised.
4
5
6
7
19