Publicité
1. Connect the air cleaner directly to a (wall) socket. The device does not have an power cord
2. Make sure the filter is correctly positioned and locked in place.
3. On the side of the air cleaner is a switch that lets you set the following functions:
+,- .
Ionic air cleaning on / LED night light on
- . , (( Ionic air cleaning on / LED night light off
((
Ionic air cleaning off / LED night light off
after switching on you will feel airflow from the vent come out of the front of the unit. This is the fresh
air which is passed along the filter.
1. Switch off the device and pull it out of the (wall) socket.
2.
Use a soft and humid piece of cloth to clean the device.
3.
Make sure that no water gets into the device.
"
To pull out the rustproof electrostatic filter:
1. Switch off the device and pull the plug. Wait for a few minutes.
2. Pull the filter out of the top of the device
0
Do never touch the metal parts of the filter since they could
be loaded electrostatically. Discharge the metal parts before touching
them for example on a heater.
!
1. Make sure that the device is unplugged.
2. Replace the filter into the opening of the device.
0
+
"
#
/
#
%
"
%
%
*
"
"
%
-
"
1
5
Publicité
