Publicité
The electrostatic steel filter must be cleaned once or twice a week depending on the indoor climate.
1. Turn off the device and pull it out of the (wall) socket.
2. Take the filter out of the device like described above.
3. Take the dust away from the metal parts of the filter with a soft and humid cloth.
4. Remove tenacious dirt with a sponge and some soap
5. Dry the filter carefully and replace it after it is well dried like described above.
/
The plasma ionizer air purifier CA#267 possesses a cleaning mechanism to scrape clean the rail
of the ionizer. The scraping takes place when the electrostatic filter is taken out and put back into
the device. Normally, we advise to clean the filter once a week. In order to clean it, pull the
electrostatic filter 4#5 times out of the device and put it back.
+
Due to the simply cleanable filter you don't have to buy any expensive replacement filters
= Therefore it's very cost effective to use!
$
"2
6
Publicité
