Publicité
EN
Before use
• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of 230V or 240V can also be
connected to a 220V supply).
• Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable.
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust
mask and work with a dust extraction device when connectable.
• Follow the dust-related national requirements for the materials you want to work with.
• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand).
• Do not clamp the tool in a vice.
• Use completely unrolled and safe extension cords with a capacity of 10 Amps.
After use
• Before you put down the tool, switch off the motor and ensure that all moving parts have come to a complete standstill.
• After switching off the tool, never stop the rotation of the accessory by a lateral force applied against it.
SPECIFICATIONS
Technical Data
BCP2000
Model
Voltage
230V/50hz
Power
900W
No-load speed
0-6000rpm
Pad Diameter
150mm
Pitch Circle Diameter
2mm
Cable Length
2m
Includes
1pcs polishing pad, 1pcs sponge, 1pcs wool plate
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included
in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall
not be liable for injuries and damages resulting from the use of non-conforming equipment.
4
WWW.NIKOLAOUTOOLS.GR
Main Parts
A. Speed regulator
B. ON/OFF switch locking button
C. ON/OFF switch
D. Polishing disc (Velcro)
E. Sponge pad
F. Ventilation slots
G. Hex wrench S6
Publicité
