Publicité
Outgoing message
The outgoing message (max 3 min) is heard by incoming calls. There are two separate outgoing
messages, one for Answer only (callers cannot leave a message) and one for normal answering
function. Please also select desired answer function. See TAM Settings.
.
Press
. Scroll to ANS. MACHINE. Press OK.
Scroll to TAM SETTINGS. Press OK.
2.
3.
Scroll to OGM SETTINGS. Press OK.
Scroll to ANSWER & REC/ANSWER ONLY. Press OK.
4.
5.
Scroll to Record MESS. Press OK.
6.
After the long beep you can record your message (speaking 20 cm from the keypad).
Press OK.
.
The message will be played back to you. Repeat the above to change.
Note!
A pre-recorded message is used until you make your own recording, and that message can
also be restored if required. To restore this, press C (right menu button) during playback
of outgoing message.
Screening
Incoming messages will be heard on the loudspeaker of the base unit as they are received.
If nothing can be heard, check that the volume is turned up and that the function has been
activated – see separate description Answer machine settings. You can also press OK on the
handset while recording is in progress. The call can be intercepted by pressing q or lifting
the receiver of another telephone connected to the same line.
Use of answer machine (base unit)
The numbers on the base unit will flash when there are new messages.
he numbers on the base unit will flash when there are new messages.
9
88 / 99
X
+ / -
Delete all old messages
After playback: Hold down X until you hear a beep.
English
Start playback
Stop playback
Prev msg/Skip forward
Delete current message
To increase/decrease the volume
0
Publicité
