Télécharger Imprimer la page

Aim TTi TG5011A Instructions page 4

Publicité

Frequency Resolution:
Output Level:
Linearity Error:
Variable Symmetry:
Pulse
Frequency Range:
Frequency Resolution:
Output Level:
Overshoot:
Jitter:
Rise/Fall Times:
Range:
Resolution:
Width Range:
Width Resolution:
Delay Range:
Delay Resolution:
Arbitrary
In built arbitrary waveforms (Sinc, Exponential Rise, Logarithmic Rise and DC). Up to 4 user-defined
waveforms may be stored in non-volatile memory. Waveforms can be defined by downloading of
waveform data via remote interfaces or from the instrument's front panel.
Waveform Memory Size:
Vertical Resolution:
Frequency Range:
Frequency Resolution:
Output Level:
Sampling rate:
Output Filter
Selects between 50MHz Elliptic or 20MHz Bessel filter depending on the waveform.
1µHz, 12 digits
10mVp-p to 10Vpp into 50
<0.1% to 30 kHz
0.0 % to 100.0 %, 0.1% resolution
500µHz to 12.5MHz [500µHz to 6.25MHz]
1µHz, 14 digits
10mVp-p to 10Vpp into 50
<5%
300ps + 0.01% of period, typical
Rise and Fall times can be independently varied or can be varied
together simultaneously.
<8ns to 40µs [<13ns to 40µs]
0.1ns (for rise and fall time ≤100ns)
1ns (for rise and fall time >100ns and ≤2µs)
10ns (for rise and fall time >2µs and ≤40µs)
20ns to 2000s (20ns min for period ≤40s; 200 ns min for period
>40s and ≤400s; 2µs min for period >400s)
10ns (for period ≤40s)
100ns (for period >40s and ≤400s)
1µs (for period >400s)
0ns to 2000s
10ns (for period ≤40s)
100ns (for period >40s and ≤400s)
1µs (for period >400s)
4 waveforms – 4 waveforms of maximum size 65536 points or
3 waveforms – 1 waveform of maximum size 131072 points and 2
waveforms of maximum size 65536 points or
2 waveforms – 2 waveforms of maximum size 131072 points.
Minimum waveform size is 2 points.
14 bits
1µHz to 10MHz [1µHz to 6MHz]
1µHz, 14 digits
10mVp-p to 10Vpp into 50
125MS/s
3

Publicité

loading

Ce manuel est également adapté pour:

Tg2511aTg5012aTg2512a