Publicité
4
Heating/cooling mode man-
agement menu. See section
"Heating and cooling control"
5
User settings menu.
In this menu, you can set:
• Time, Date (Manual, Automatic).
• Time and date if the device is in manu-
al time update mode.
• Summer-Winter (Manual, Automatic).
• Temperature unit (°C, °F).
• Backlight brightness
• Screen saver (Enabled, Disabled).
• Factory default user (interface).
6
WIFI menu.
Reading button (refreshment).
The Internet access password allows to link
your central unit to your Internet account
(See below) for a remote control of your
system through the Internet or smartphone.
n.b.: At first use or software update, wait for
some time until the green State icon is active.
7
General commands menu. Use
this menu to put all the same devices
type in the same operating mode.
8
A
WIFI settings
To set the Wi-Fi configuration (SSID
and password), you can do it manually
or by scanning active networks.
Configuration requesting a registration
on a web page is not supported.
8
Installation menu
(Long press)
A
WIFI settings
B
House creation
C
Radio Pairing
D
Delete a device
E
Delete all devices
F
Anti freeze setpoint: 7.0°C
G
Heating Settings
H
H&C
I
General factory default
J
Update Firmware
!
Wi-Fi status:
0/2 : Central unit is not connected to
the Wi-Fi router
1/2 : Central unit is connected to the
Wi-Fi router but not to the server
2/2: Central unit connected to the
Wi-Fi router and to the server (pair-
ing of the central to an account is
required)
n.b.: The connection to Internet is rec-
ommended with Certified Wi-Fi routers
(http://www.wi-fi.org/certification).
n.b.: For the network scan, repeat
at least twice the operation if your
desired Wi-Fi network is not displayed.
If your desired Wi-Fi network is still
not displayed, enter the Wi-Fi settings
manually.
BT-CT03-RF-IOM-FR-W-EN-10-23
EN
Installation
Publicité
