EN
2.2 Install your central
2.2.1 Wall mounting
not to be used
mains power supply
85-265vac - 50 / 60hz
Connect the power as described above
Put the switch on ON position
Mount the Central on the
power unit and slide it on the
bottom to clip it. The Central
is ready for operation.
2.2.2 Table installation (with
optional mini USB cable – sold
seperately)
Connect the central unit with the
mini USB cable (5V, 1A) and then
mount the leg support on it and
put the switch on ON position.
The central unit is ready for oper-
ation.
BT-CT03-RF-IOM-FR-W-EN-10-23
UP
ON / OFF
Mini
USB
cable
ON / OFF
Tab
Screw the power unit on the wall and
connect to power supply.
Note! The tab must be on the top!
5