Publicité
2. Battery cabinet installation
Confirm the position of the inverter bracket on the battery
1
cabinet.
1
Remove the carton, remove the two M10 screws on the
3
two sides of the inverter. Install the two handles into the
two holes.
Hold the inverter by hands when lifting it from the carton
5
or it is near the mounting bracket to prevent inverter
damage.
7
Secure the mounting bracket and the inverter.
3
2
M10 screw
2
1
Take the mounting bracket out from the inverter carton.
Align the bracket with the holes on the cabinet, secure
2
the bracket with screws from the cabinet accessory.
4
Lift the inverter from the carton. Do not damage the
coating on the inverter.
Remove the handles on the two sides of the inverter.
6
Reinstall and tighten the screws.
M10
24 N·m
1
2
3
3
M10 screw
M5*50 screw
2±0.2 N·m
Publicité
