Publicité
2
1
Align the bracket with the drilling holes on the wall,
5
Knock expansion bolts through the bracket and into the
wall. Tighten the screws with a torque wrench.
Lift the inverter from the carton. Do not damage the
7
coating on the inverter.
Remove the two handles installed on the inverter and
9
reinstall and tighten the two M10 screws on the inverter.
58
M10*100
24 N·m
6
8
1
2
3
3
M10 screw
10
M10 screw
1
Remove the carton, remove the two M10 screws on the
two sides of the inverter. Install the two handles into the
two holes.
Hold the inverter by hands when lifting it from the carton
or it is near the mounting bracket to prevent inverter
damage.
M5*50 screw
2±0.2 N·m
Secure the inverter and the mounting bracket with
M5*50 screws.
3
2
Publicité
