Télécharger Imprimer la page

FLAEM LightNeb Mode D'emploi page 24

Masquer les pouces Voir aussi pour LightNeb:

Publicité

TROUBLESHOOTING
Problem
Cause
The device does not switch
• Power supply
on.
problem.
If, after checking the conditions described above, the device still is not working properly, we recom-
mend that you contact your trusted dealer or an authorised FLAEM service centre nearest to you. You
can find a list of all Service Centres at http://www.flaemnuova.it/it/info/assistenza.
DISPOSAL
Appliance
In accordance with Directive 2012/19/EC, the symbol on the equipment indicates that
the equipment to be disposed of (excluding accessories) is considered as waste and must
therefore be subject to 'separate collection' . Therefore, the user must deliver this waste
(or have it delivered) to the separate collection centres set up by the local authorities, or
hand it over to the retailer when purchasing a new appliance of an equivalent type. Separate
waste collection and subsequent treatment, recovery and disposal operations promote the
production of equipment from recycled materials and limit the negative environmental and
health effects caused by improper waste management. Unauthorised disposal of the product
by the user entails the application of the administrative sanctions provided for in the laws
transposing Directive 2012/19/EC of the member state or country where the product is
disposed of.
Attachment
Accessories such as masks and mouthpiece are to be disposed of as general waste after a
disinfection cycle.
packaging
20
Product box
PAP
07
Product packaging bag
O
NOTIFICATION OF SERIOUS EVENTS
Serious events occurring in connection with this product must be reported immediately to
the manufacturer or the competent authority.
An event is considered serious if it causes or may cause, directly or indirectly, death or an
unforeseen serious deterioration in a person's state of health.
Remedy
• Check the Batteries have been
inserted with the correct polarity.
• Batteries down or depleted. Replace
or recharge.
03
Battery heat shrink film
PVC
Accessory heat shrink film
05
PP
24

Publicité

loading