Publicité
........ continuation
Note :
It is also possible to display the tolerance limits when the instrument is operating in MIN, MAX or DELTA (TIR) mode.
- If no tolerance limit has been defined by the user, the instrument will display the tolerance limit indicators
will not turn on the indicator lights (red - green - yellow).
It is possible to assign a different preset value to each of the 2 References. Similarly, different tolerance limits can be
assigned to References 1 and 2.
.......Inputting a multiplication factor other than 1.0000
Next digit
.......Automatic switch-off mode
= de-activated,
.......Keypad lock
Only the Favorite key
(to unlock the keypad, press
9
0...9
save Preset
= active (after 20 min.)
remains active
for 5 sec)
E
, but
OK
Publicité
