Publicité
CAUTION!
1)
The battery can be used hundreds of times. However, if you notice a significant reduction in performance,
please replace the battery with a new one.
2)
Charge the battery promptly to prevent it from being completely drained, as this may render it permanently
unusable. If the battery is not used for an extended period, it will discharge automatically. Ensure to charge the
battery at least once every quarter.
3)
Do not connect the two battery terminals with a wire, as this may cause an electric spark, fire, or even an
explosion.
4)
Do not use or charge a damaged battery, as this increases the risk of electric shock.
5)
Never burn batteries under any circumstances, as they may explode.
6)
When charging the battery, do not cover the charger with any objects, as this may prevent proper heat
dissipation and could cause a fire.
7)
Disconnect the charger when not in use to reduce the risk of injury to children and untrained personnel.
8)
Do not use the charger in a humid environment, and avoid exposure to rain or snow, as this increases the risk
of electric shock.
9)
Do not disassemble the battery or charger without authorization. If any issue arises during use, consult a
professional or contact the manufacturer for repair until the problem is resolved.
2. Usage of the tool
OLED display interface description:
Tool LED illuminator:
When the start button is pressed, the LED illuminator
•
will turn on.
After releasing the tool, the LED light will automatically
•
turn off after a 20-second delay.
Before installing the battery, press the start button.
•
•
Once the battery is installed, release the start button to
turn off the LED light.
•
If the LED light remains on, reinstall the battery.
Please refer to the image for further clarification.
EN
A - LED light
B - Battery status
C - Information display area
D - Cumulative crimping times
Publicité
