Publicité
EN
3.
Function description
Microcomputer control system – Automatically detects pressure during crimping and provides
double safety protection.
OLED display – Dot matrix OLED display shows crimping times, battery power, working pressure (if
equipped with a pressure sensor), maintenance reminders, and fault codes.
Auto reset – Automatically releases pressure and retracts the piston to the starting position when
maximum output is reached.
Retraction stop – During multiple crimps, press the start button again to stop the piston from
retracting and continue working, improving efficiency.
Manual reset – Allows the piston to retract to the starting position in case of incorrect operation.
The unit is equipped with a double piston pump which allows the rapid approach of the die
towards the connector and a slow crimping motion for precision.
The unit is equipped with a double piston pump which allows the rapid approach of the die
towards the connector and a slow crimping motion for precision.
If a deviation from set pressure or low battery is detected, an acoustic signal will sound, and the
red display will flash.
The compact structure, non-slip rubber grip, and optimized center of gravity make operation easier.
A temperature sensor automatically stops the tool when the motor surface temperature exceeds
60°C. The tool will resume operation once cooled.
Publicité
