Publicité
To operate this tool safely, it is essential to carefully read and follow all instructions in this manual.
1. Work area safety
a) Keep the work area clean and clear. Cluttered or dark areas invite accidents.
b) This tool is not insulated; please do not use it on live conductors.
c) Avoid using or storing the tool in high temperatures or areas containing corrosive fluids. Regularly inspect for
aging of the sealing kits.
d) Keep children and bystanders away while operating the battery-powered tool. Distractions can cause a loss of
control.
2. Electrical safety
a) Ensure that the plug fits properly into the outlet. Do not alter the plug.
b) Do not expose the tool's battery or charger to rain or wet conditions. Water entering the electric system can
cause an electric shock.
c) Avoid using the electric wire to carry or pull the plug. Damaged or tangled wires may cause an electric shock.
d) If the charger is damaged (e.g., dropped or crushed), do not attempt to repair it yourself. Return it to an
authorized service center.
e) Charge the tool in temperatures between 10°C and 40°C. Ensure the air vents of the battery and charger remain
uncovered during charging.
f) Disconnect the charger when not in use to reduce hazards for children or untrained individuals.
g) Do not overcharge the battery. Recharging when fully discharged may render the battery non-functional. Store
the battery outside of the tool to prevent discharge.
h) Do not burn or short-circuit the battery, as it may cause an explosion.
i)
If any issues arise, contact the manufacturer or agent; do not disassemble the battery or charger.
3. Personal safety
a) Remain alert and use common sense when operating the tool. Do not use the tool when tired, under the
influence of drugs, alcohol, or medication. Inattention may result in serious injury.
b) Wear appropriate safety equipment, such as a mask, helmet, safety cap, and insulating shoes.
c) Avoid wearing loose clothing or jewelry and keep hair and gloves away from moving parts. Loose clothing or
long hair can get caught in moving parts.
d) Maintain power tools in good condition. Check for misalignment, binding of moving parts, or broken
components that could affect operation. If damaged, have the tool repaired before use.
e) Use the tool as intended, with the correct power settings, for optimal and safe operation.
f) Keep fingers away from the tool's head during operation to avoid injury.
4. Service
Have your crimping tool serviced by a qualified technician, using only identical replacement parts. This ensures
safety and proper functionality.
EN
GENERAL SAFETY RULES
Publicité
