1) Maintain labels and nameplates on the tool as they contain important safety information. If they become
unreadable or missing, contact the agent for a replacement.
2) This product is not a toy, keep it out of reach of children.
3) Ensure the tool's head is locked securely before operation.
4) Do not use the tool without dies.
5) Do not crimp live cables or conductors.
6) Only crimp copper (Cu) or aluminum (Al) conducting materials.
7) Do not knock or damage any parts of the tool, as this may cause injury.
8) Do not operate the tool continuously. After 30-40 cycles, allow the tool to cool for 15 minutes.
9) Do not secure this tool in a vise. This tool is designed for hand-held operation.
10) The built-in safety valve undergoes strict pressure tests. Do not adjust the pressure unless performed by a
professional.
11) The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense and caution
are essential when using the device.
EN
SPECIFIC SAFETY RULES