AKASO BRAVE 4 PRO Manuel D'utilisation page 26

EN
2. Photo Settings
(1) Photo Resolution
20MP / 16MP / 13MP / 8MP (Default setting: 20MP)
This camera is capable of capturing 20MP photos, with higher resolution offering
greater clarity and detail due to the increased number of pixels. However, higher
resolution photo also results in larger file sizes.
(2) Burst Photo
3P/S, 5P/S, 10P/S (Default setting: 3P/S)
Set the number of photos to be taken per second in Burst Photo mode. The
camera will continuously take multiple photos at the specific shot.
Note: Only available in Burst Photo mode.
(3) Time Lapse Interval
Off / 3Sec / 5Sec / 10Sec / 20Sec / 30Sec / 60Sec (Default setting: 3Sec)
Set the interval at which the camera captures photos in Time Lapse Photo mode.
For instance, if you select the "3 Sec" option, the camera will start counting down
from 3 and continuously take a photo till you press the Shutter button again.
Note: Only available in Time Lapse Photo mode.
(4) Countdown
3Sec / 5Sec / 10Sec / 20Sec / 30Sec / 60Sec (Default setting: 20Sec)
Set the countdown time before the camera takes a photo in Self-Timer mode. For
instance, if you set "Countdown" to "3Sec", the camera will count down from 3 to 1
before capturing the shot.
Note: Only available in Self-Timer mode.
22