AKASO BRAVE 4 PRO Manuel D'utilisation page 14

EN
2. Operation Instructions
2.1 Powering on or off
When the camera is turned off, press and hold the Power button for 3 seconds to
turn on the camera.
When the camera is turned on, press and hold the Power button for 3 seconds to
turn off the camera.
2.2 Switching shooting modes
When the camera is turned on, tap the Mode icon at the bottom of the screen to
enter the mode menu, then choose the desired shooting mode. The camera will
enter the selected mode. You can also press the Mode button to switch modes.
Tip: To exit the mode menu, tap the "X" icon in the upper right corner. There are 9
modes of this action camera: Normal, Timelapse Video, Loop Recording, and Slow
Motion, Photo, Burst Photo, Timelapse Photo, Self-Timer, and Wifi.
2.3 Switching screens
When the camera is turned on, press and hold the Mode or Up button to toggle
between front and touch screens.
2.4 Zooming in or out
On the preview screen, tap the "+" icon to zoom in, and tap the"-" icon to zoom
out. Brave 4 Pro action camera supports up to 5X.
2.5 Using the shutter button
In Photo or Video mode, press the Shutter button to capture photos or start video
recording. To stop recording in Video mode, press the Shutter button again.
00:00:00 03:21:11
Normal
x1.0
4K30fps
10