Télécharger Imprimer la page

Casals CGT23050C Mode D'emploi page 15

Publicité

The schedules established by local
authorities must be respected.
Work with the machine at the lowest
possible engine revolutions.
Where dust is generated, the surface must
be slightly moistened or an attached
irrigation piece must be used, if available.
ADDITIONAL SAFETY WARNINGS
Ensure that all nuts, screws and bolts are
always secured to ensure that the
appliance is in a safe operating state.
Only use original spare parts and
accessories.
Unused power tools should be placed in a
dry location.
When the network connection cable is
damaged, it must be replaced by the
manufacturer or its technical assistance
service or by a qualified person, thus
avoiding any danger.
The nylon thread will continue to work for
a few seconds after turning off the tool.
Do not touch dangerous moving parts
before the machine is disconnected from
the mains and the dangerous moving
parts have come to a complete stop.
The device can be connected to any
protected socket with a min. of 10A (with
230 V voltage). The release current should
not exceed 30mA max.
Explanation of the warning plate on the
appliance (Fig.6)
1. Danger
2. Wear protective glasses.
3. Put on ear protection
4. Protect from humidity
5. Read the instruction manual
6. Unplug the device if the cable is
damaged
7. Keep the device out of the reach of
other people
DESCRIPTION
A - Cable
B - Safety lock
C - On/off switch
D - Additional handle
E - Screw for additional handle
F - Retention device for bar adjustment
G - Upper bar
H - Lower bar
I - Edge guide
J - Retention device for the rotating motor
head
K - Wire spool
L - Protection cover
M - Cable support
N - Screws
O - Retention device to regulate the angle
of the bar
If your device model does not have the
accessories described, you can purchase
them from the Technical Assistance
Services or from the website
www.casalstools.es
INSTRUCTIONS FOR USE
BEFORE FIRST USE
Make sure you have removed all parts
from the packaging.
Before connecting the appliance to the
mains, verify that the voltage indicated on
the nameplate matches the mains
voltage.
Prepare the device according to the
function you want to perform.
The device and packaging material are
not a toy. Do not allow children to play
with plastic bags, sheets and small parts.
Risk of ingestion and suffocation!

Publicité

loading