Publicité
⑤Operation Instruction.
Turn on the device: Click "Power".
General function selection:
1. Click "
" to enter the general function menu;
2. Select the corresponding function according to your needs;"Instant Heating"：u n der this working
mode, after heating to the set temperature value, it will transfer to the warming state, and when the
current water temperature drops to the value of 8℃ lower than the set value [set temperature -8C]
will start heating to the set temperature again, and keep the cycle going.
-"Anti-Bacteria"：under this mode (the temperature is not adjustable), the system will enter the heat
preservation state after heating to 80°C, and return to instant heating after 30 minutes of heat
preservation.
-"ECO"：This function is the same as the instant heat function, but the set temperature is fixed at 55°
C and cannot be adjusted.
-"Smart"：The system would memorize the user's last week water consumption habits and
automatically adjusts the set temperature.
9
Publicité
