Publicité
TECHNICAL DATA
GREASE GUN
Production code.......................................................................
Max. operating pressure ..........................................................
Flow rate ..................................................................................
Cylinder capacity bulk..............................................................
Cylinder capacity cartidge .......................................................
Hose rating ..............................................................................
Battery voltage.........................................................................
Weight according EPTA-Procedure 01/2003 ...........................
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) .......................................
Sound power level (K = 3 dB(A)) ............................................
Always wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
.....................................................
h
Uncertainty K= .........................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all
instructions, including those given in the accompanying
brochure. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
High pressure can cause some tool parts or hose assembly
to rupture, posing a risk of injection injury and/or
amputation. Inspect tool and hose assembly for damage or
wear before each use. Do not use if damaged or worn.
Hold Hose Assembly by spring strain relief to avoid kinking
the hose.
Grease and lubricants may be flammable. Do not expose to
flame or heat source. Follow all warnings and instructions
from grease and lubricant manufacturer.
To avoid damage to the grease gun and pump, the loader
ftting must be compatible with the coupler and rated for at
least 690 bar.
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes
and apron.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System C18 chargers for charging System C18
battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
20
ENGLISH
M18 GG
..................... 4404 26 01...
...000001-999999
.........................562 bar
...........................74 g/min
.........................454 g
......................... 411 g
.........................690 bar
...........................18 V
..........................3,9 kg
........................73,0 dB (A)
........................84,0 dB (A)
.......................< 2,5 m/s
2
..........................1,5 m/s
2
SPECIFIED CONDITIONS OF USE
The grease gun is designed to grease lubrication points,
which usually are greased by using grease guns. It must
use commercially available grease (in cartriges or bulks),
suitable for usage in grease guns.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under "Technical Data" fulfills all the relevant
regulations and the directives 2011/65/EU (RoHs),
2006/42/EC, 2004/108/EC and the following harmonized
standards have been used:
EN 60745-1:2009 + A11:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
Winnenden, 2012-12-10
Alexander Krug
Managing Director
Authorized to compile the technical file.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
New battery packs reach full loading capacity after 4 - 5
chargings and dischargings. Battery packs which have not
been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION LI-ION BATTERY
The battery pack has overload protection that protects it
from being overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch off the
machine automatically. To restart, switch the machine off
and then on again. If the machine does not start up again,
the battery pack may have discharged completely. In this
case it must be recharged in the battery charger.
PRIMING THE GREASE GUN
Hold the hose assembly by the spring strain relief and point
away from your body.
Pull the trigger for 3 seconds, release, and repeat until
grease begins to flow from the fitting.
If after several attempts grease does not appear, manually
prime the grease gun:
Pull back the rod and turn the rod handle to lock into the
plunger.
Press in the bleed valve while manually pressing in the rod.
Once grease begins to flow from the fitting, rotate the rod
handle to release the plunger. Press the rod completely into
the cylinder.
NOTE: This tool has been tested to factory standards, which
results in a small amount of grease being left in the pump
body, hose and coupler assembly. It is recommended that
you purge this tool with the brand of grease you will be
using before actual use.
TROUBLESHOOTING
Unable to pull back rod:
Press the bleeder to release pressure.
Unable to push rod forward:
Rotate rod 90° to disengage it from plunger.
No grease when trigger is pulled:
Cylinder is empty, add grease.
Air pockets in the cylinder, prime the grease gun.
MAINTENANCE
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Remove the battery pack before starting any
work on the machine.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their
life must be collected separately and returned to
an environmentally compatible recycling facility.
ENGLISH
21
Publicité
