Publicité
OPERATION
The FAN may be operated by the manual controls located on the FAN (as
shown in Fig 3) or by your remote control (shown in Fig 2) .
1. Place the FAN on a stable flat surface. Plug the cord set into a 120V~
electrical outlet. Plug on the FAN, existing room temperature will be
displayed at display panel.(shown in Fig. 4)
2. POWER
FAN off by pressing the 'POWER' button again.
3. SPEED
medium, or high by pressing 'SPEED' . The speed setting is displayed on
the LED panel (shown in Fig 4) .
4. MODE
: Pressing the 'MODE' button will set the FAN into NORMAL
mode, NATURAL mode , SLEEP mode and Child mode
- NORMAL Mode
- NATURAL Mode
speed(5s)→high speed(5s)→low speed(5s), it works as per this recycle.
(Fig 2)
: Turn the FAN on by pressing the 'POWER' button; Turn the
: You can adjust the fan speed to the desired level: low,
: Fan will start work at any speed you set up.
:Fan will start work at low speed(5s)→medium
15
(Fig 3)
Publicité
