Publicité
WLK Woodland Media Kit Installation Instructions
WARNING
!
•
Do not touch safety screen until cooled.
•
Allow safety screen to cool completely before any maintenance, as it will remain hot after appliance is no longer
operating.
•
To avoid danger of suffocation keep the packaging bag away from babies and children. Do not use in cribs, bed,
carriages, or play pens. This bag is not a toy. Knot before throwing away.
note:
Images are for illustrative and placement purposes only. Actual Woodland Media Kit components will appear differently.
Glass
Glowing Embers
1. Install logs prior to the Woodland Kit installation as per instructions above.
2. Thinly separate the glowing embers and place them on the burner. Avoid covering the large cluster of ports, as this will
reduce the height of the flame (Fig. 1).
3. Install a layer of glass around the logs and over the mesh area to allow lights to shine through. Glass should be washed
and dried before install. Do not cover burner (Fig. 2).
4. The splinters should be placed around the outer portion, over the sheet metal tray. Do not cover burner (Fig. 3).
5. Place rocks randomly in the larger voids of the previously placed media. Do not cover the burner.
6. Spread charcoal randomly on top of the other media. Do not cover the burner.
7. Spread vermiculite randomly on top of the other media. Do not cover the burner.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com
Splinters
Rocks
Charcoal
Vermiculite
W415-4177 / A-0 / 05.24.24
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Publicité
