Publicité
Liens rapides
INSTALLATION INSTRUCTIONS
KIT CONTENTS:
1. Rear Bumper Appliqué (1).
2. Squeegee (1)
TOOLS REQUIRED:
MEANING OF CHARACTERS:
Denotes warnings that may lead to
serious physical injury or vehicle
damage.
Denotes cautions to be taken to avoid
physical injury or electronic component
damage.
Denotes cautions to be taken to avoid
vehicle and component damage.
DESCRIPTION
Rear Bumper Appliqué
PART NUMBER: E771SAN000
DESCRIPTION:
Legacy Rear Bumper Appliqué
1. Rear Bumper Appliqué
Soft lint-free
Microfiber Cloth
ISSUE
00
2. Squeegee
32 ounce
Spray Bottle
Denotes quality processes to be
checked prior to moving to the next
step.
Denotes specific tools that are
necessary to complete the step.
Denotes instructional steps
necessary to complete the
process.
DATE
SUBARU OF AMERICA
8/1/18
• 20% Alcohol
• 80% Water
• 2ml Baby Shampoo
Denotes safety equipment required to be used
such as a mask, goggles, rubber gloves, and
hearing protection.
Mask
Goggles
Rubber Gloves
Hearing Protection
PAGE
1/4
Publicité
Manuels Connexes pour Subaru E771SAN000
Sommaire des Matières pour Subaru E771SAN000
- Page 1 PART NUMBER: E771SAN000 DESCRIPTION: INSTALLATION INSTRUCTIONS Legacy Rear Bumper Appliqué KIT CONTENTS: 1. Rear Bumper Appliqué (1). 2. Squeegee (1) 1. Rear Bumper Appliqué 2. Squeegee TOOLS REQUIRED: • 20% Alcohol • 80% Water Soft lint-free • 2ml Baby Shampoo...
- Page 2 Spray Bumper Surface Before removing liner, locate the center notch in the applique Spray bumper surface with Application Solution. directly under the notches in bumper and align as shown above. DESCRIPTION ISSUE DATE PAGE SUBARU OF AMERICA Rear Bumper Appliqué 8/1/18...
- Page 3 Remove top protective covering CAREFULLY 180° against four back and forth strokes in the direction shown. itself. Re-spray appliqué surface with application solution. Re-squeegee any areas or edges that may have lifted during premask removal. DESCRIPTION ISSUE DATE PAGE SUBARU OF AMERICA Rear Bumper Appliqué 8/1/18...
- Page 4 Wash bumper appliqué with warm soapy water as needed, (do not use other chemical based cleaners). Visual Check Items to be Checked Results of the Check Make sure all edges are firmly adhered. DESCRIPTION ISSUE DATE PAGE SUBARU OF AMERICA Rear Bumper Appliqué 8/1/18...
- Page 5 NUMÉRO DE PIÈCE : E771SAN000 DESCRIPTION : INSTRUCTIONS D’INSTALLATION Pellicule de pare-chocs arrière pour Legacy CONTENU DU NÉCESSAIRE : 1. Pellicule de pare-chocs arrière (1). 2. Raclette (1) 1. Pellicule de pare-chocs arrière 2. Raclette TOUTILS REQUIS : • Alcool : 20 % •...
- Page 6 Avant de retirer le revêtement, repérer l’encoche au centre Vaporiser la solution pour l’application sur le pare-chocs. de la pellicule et celles du pare-chocs et faites-les correspondre comme indiqué ci-dessus DESCRIPTION VERSION DATE PAGE SUBARU OF AMERICA Pellicule de pare-chocs arrière 8/1/18...
- Page 7 Enfin, passer la raclette sur la surface surfaces qui se sont soulevées lors du retrait de la pellicule verticale du pare-chocs en partant du centre vers l’extérieur, superficielle. comme illustré ci-dessus. DESCRIPTION VERSION DATE PAGE SUBARU OF AMERICA Pellicule de pare-chocs arrière 8/1/18...
- Page 8 (ne pas utiliser des produits de nettoyage chimiques). Vérification visuelle Éléments à vérifier Résultats de la vérification Vérifier que tous les bords sont bien collés. DESCRIPTION VERSION DATE PAGE SUBARU OF AMERICA Pellicule de pare-chocs arrière 8/1/18...