LG DLGX2902V Guide De L'utilisateur Et Directives D'installation page 41

STACkING kIT INSTALLATION
Place the dryer on top of the washer by
3
fitting the dryer feet into the side brackets as
illustrated. Avoid finger injuries; do not allow
fingers to be pinched between the washer
and dryer. Slowly slide the dryer toward the
back of the washer until the side bracket
stoppers catch the dryer feet.
kEY DIMENSIONS AND SPECIFICATIONS
The appearance and specifications listed in this guide may vary due to constant product improvements.
Dryer Models DLE2301W, DLE2301R, DLE2301S, DLG2302W, DLG2302R, and DLG2302S
Description
Electrical Requirements*
Gas Requirements*
Dimensions
Net Weight
Drying Capacity
*Refer to the rating plate on your dryer.
40
(cont.)
Dryer
Washer
Dryer
Please refer to the rating label regarding detailed information.
NG: 10–13 in. WC/LP: 10–13 in. WC (Gas Models only)
11
27"(W) X 30"(D) X 38 /
16
68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 127 cm (D with door open)
126 lb. (57.2 kg)
IEC 7.3 cu. ft. (22.5 lbs./10.2 kg)
Insert the front rail between the bottom of
4
the dryer and the top of the washer. Push the
front rail toward the back of the washer until it
comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.
"
"(H), 50 (D with door open)