Publicité
Step 25
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D635 and D636).
å
Fasten a DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D636)
and a DRAWER LEFT (35GD) to the LEFT DRAWER SIDE (D635). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted
hole in the SLIDE.
å
Repeat this step for the remaining drawers.
Roller end
2
3
Page 30
1
D635
GOLD 5/16" FLAT HEAD SCREW
(24 used in this step)
www.sauder.com/service
10A
3S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D636
1
2
3
Drawer Slide
Center the screw in the oval hole.
5
Roller end
420946
Publicité
