Publicité
6. care and maintenance
•
Clean the model carefully after every flying session.
•
The model and the remote control system components should only be cleaned using suita-
ble materials.
Please ask your local model shop for advice on this.
7. Trouble shooting
Problem
Propeller does not ro-
tate
Propeller suddenly
stops rotating
The Sky Surfer is not re-
sponding to commands
of the transmitter
37
cause
• ON/OFF-switch OFF
• Flight battery fully discharged
• Battery almost discharged, the
ESC switches off the motor for sa-
fety reasons
• Throttle stick not calibrated
• Transmitter - Receiver not bound
together
Solution
• Switch ON the model
• Charge flight battery
• Charge flight battery
• push the left throttle stick to the top
of the transmitter once (full throttle)
and then again all the way down
(motor off)
• Bind transmitter / receiver - see
point 11
Operating Instructions Sky Surfer 2.0
Publicité
