Publicité
Terminal
Plastic tube
The parachute support rod can be removed for easier transport.
Note:
the joined reinforcing rod is longer than the span of the canopy. it is under constant
light tension when installed, and cannot fall out.
Operating Instructions Sky Surfer 2.0
Connector tube
Plastic tube
Connector tube
Plastic tube
Pay your most
careful attention
not to damage
the parachute when
getting the parachute
support in and out.
Assembly of parachute support:
1. Fit the parts together in the numerical order
(1 - 3)
2. Slip the parachute support through the
holes in the ribs (4)
3. Ensure that the plastic tubes are pushed
right into the coupling sleeves - see (5 - 6)
Terminal
30
Publicité
