Télécharger Imprimer la page

GRAUPNER Sky Surfer 2.0 ARTF Manuel D'utilisation page 30

Publicité

Front lines (yellow)
Hook suspension lines
Now attach the rear lines
(red) in the round eyes of
the hook suspension lines
(white) and those in the
holes of the right and left
servo rods (A). Note the
wind speed.
Guidelines for checking wind speed:
- light breeze (approx 5 km/hr): leaves on trees moving
- moderate breeze (about 15 km/hr): Leaves and thin twigs moving
The model must not be flown if the wind is any stronger (more than 15 km/hr)!
The model's airspeed has to be adjusted to suit the prevailing wind conditions and the pilotes
preferences, and this is done by selecting different connection holes to alter the angle of
attack. The higher the holes are chosen, the faster the model flies.
29
Rear Lines (red)
moderate breeze:
use the fourth hole
from bottom
light breeze:
use the central hole in
the servo pushrod for
the rear lines
Operating Instructions Sky Surfer 2.0

Publicité

loading

Ce manuel est également adapté pour:

92210.v2