Publicité
1. Open the battery cover located at the bot-
tom of the chassis by removing the stop-
per.
2. Pull out connector located in the battery
compartmenet and connect the battery
pack.
3. Put the connector first in battery com-
partment and then the LiPo battery pack
as shown.
Charge the flight battery:
Safety notes:
•
First read all safety notes on page 21 - 24!
•
Use only the recommended LiPo balancer char-
ger order-No. 6454. Charge only indoors!
•
The battery to be charged must be placed on a
non-flammable, heat resistant and non-conduc-
tive surface. Keep inflammable and volatile ma-
terials well away from the charging area. Bat-
teries must not be left on charge unsupervised.
•
The charging process should be proceed under
the supervision of adults, with children should
be kept away.
charging process:
•
Please read the manual of the used charger carefully!
31
4. After installing the LiPo pack close the batt-
tery cover. Pay attention to the click sound
which tells you it is closed tight.
Operating Instructions Sky Surfer 2.0
Publicité
