Publicité
7. Wall Control Installation
SINGLE-POLE INSTALLATION
(One fan controlled by one wall control)
(See Figure 29).
HOT
BL
GROUND
NEUTRAL
Figure 29
FAN/LIGHT
BLACK
GROUND
(Continued)
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse or circuit breaker box before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
!
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
18
WARNING
WARNING
WARNING
ETL Model No.: CF275
Publicité
