brennenstuhl RM L 3100 Mode D'emploi page 21

086215 Rauchwarnmelder RM L 3100.qxp_086215 BA_Rauchwarn
RM L 3100
Interpreting signals/troubleshooting
Display
LED flashes once
every 40 seconds.
Continuous, pulsa-
ting tone.
LED flashes once
per second.
LED flashes once
every 8 seconds.
LED flashes once
every 40 seconds,
and the device
beeps.
The device beeps
every 40 seconds
The device beeps
three times every 1.5
seconds.
LED flashes once
every 10 seconds,
and the device
beeps.
Operating Instructions
Meaning
Indicates that the
smoke detector is
working properly.
Alarm or test
function has been
triggered.
The smoke detec-
tor has been
muted.
The integrated
battery is weake-
ning.
An error has
occurred
The smoke detec-
tor is in test mode.
The product has
reached the end
of its lifespan.
Solution
–
- Leave the danger
zone at once.
- Release the test but-
ton (if testing).
The smoke detector is
de-sensitised for
approx. 10 minutes.
- This message can be
deactivated for 10
hours by pressing the
test button.
- The device must be
replaced at once.
- This message can be
deactivated for 10
hours by pressing the
test button.
- The device must be
replaced at once.
Release the test but-
ton to end the test.
The device must be
replaced at once.
21