Publicité
STARTING THE AIR CONDITIONER cont.
FILTER RESET
This feature automatically notifies you that the air filter must be cleaned. The indicator light will
come on after 240 hours of operation. Clean the air filter (refer to Care and Cleaning), place it back
in the front panel, and press the Filter Reset button. The light will turn off.
USING THE REMOTE CONTROL
Remote control may differ in appearance from the image shown.
NOTE: Please remove the back of the controller and insert two AAA batteries.
Replace batteries after 6 months of use or when remote control starts to
lose power.
NOTE: DO NOT mix old and new batteries.
POWER
Press the
button to turn on the air conditioner.When you first press the
button, the air conditioner will operate in Energy Save mode, Quiet fan speed and
temperature of 72°F. You can select any other mode to satisfy your needs.
Speed
High - r P ess High button to choose high fan speed.
Med - r P ess Med button to choose medium fan speed.
Quiet - r P ess Quiet button to choose quiet fan speed.
Auto Cool - r P ess Auto Cool button to choose auto cool fan speed.
MODE
FAN
- Press the fan button to activate fan mode.
COOL
- Press the cool button to activate cool mode.
ENERGY SAVE
- Press the energy save button to activate energy save mode.
DEHUM
- Press the dehum button to activate dehum mode.
TIMER
To set the air conditioner to turn off after a set amount between 1 hour and 24 hours
(unit must be ON):
1. Press the TIME ON/OFF button on the remote control to select the time off function.
2. Press the TIMER UP or TIMER DOWN arrow button to change the delay time from 1 hour to 24
hours.Timer OFF indicator light on the air conditioner control panel will illuminate.
3. The buzzer beeps twice after 5 seconds, then Timer OFF countdown will initiate.
PAGE 18
USING YOUR AIR CONDITIONER
Fig. 22
Publicité
