Kohler Rival K-30472-CP Guide D'installation Rapide

Record your model number:
Noter le numéro de modèle :
1483385-2
Anote su número de modelo:
CAUTION: Risk of product damage. Do not use a power driver when
tightening screws.
Do not tighten the faucet shank. The faucet has been designed with slight
movement in the shank. This is normal, and requires no adjustment.
If possible, assemble the faucet to the sink before installing the sink.
Follow all local plumbing and building codes.
Turn OFF the water supplies.
1A. Supply Stops
2A. Install the escutcheon (optional). Insert the spout.
4A. Install the washer and threaded ring.
5A. Position the screws to the front and back. Tighten the screws.
6A. 3" (76 mm) Minimum Diameter
6B. Connect and tighten the supply hoses. Do not kink the hoses!
7A. Turn ON the water supplies and check for leaks.
9A. Flush hot and cold water for 1 minute to remove any debris.
Need help? Contact our Customer Care Center.
• USA/Canada: 1-800-4KOHLER (1-800-456-4537) Mexico: 001-800-456-4537
• Service parts: kohler.com/serviceparts
• Care and cleaning: kohler.com/clean
• Patents: kohlercompany.com/patents
This product is covered under the KOHLER ® Faucet Lifetime Limited
Warranty, found at kohler.com/warranty. For a hardcopy of warranty terms,
contact the Customer Care Center.
ATTENTION : Risque d'endommagement du produit. Ne pas utiliser
de tournevis électrique lors du serrage des vis.
Ne pas serrer la tige du robinet. Le robinet a été conçu avec un léger
déplacement dans la tige. Cela est normal et ne nécessite aucun ajustement.
Si possible, installer le robinet sur l'évier avant d'installer ce dernier.
Respecter tous les codes de plomberie et de bâtiment locaux.
Couper les alimentations en eau.
1483385-2 B
-
1
A
4
A
1
2
A
5
A
3
6
B
A
Kohler Co.