Publicité
Unique Features
RDM, stand for "Remote Device Management", with this function, users can realize remote control
of the device, such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful
information such as temperature, power consumption, fan speed. Etc. Every single device has a
unique RDM code before left factory to distinguish from each other, usually not suggest users
change this code freely.
Software upgrade function via DMX cable, if there is any new firmware for this device come out, it
can be upgraded simply via a software upgrade box, no need to change any mechanical parts. The
upgrade box is not included in the package, if need any further assistance pls just contact authorized
dealers.
Hibernation, the device will enter sleeping mode if activated after a period of disconnecting DMX
signal to save the power consumption, and will return immediately as soon as the DMX signal is
sent again.
Display battery, this function is prepaid in the display PCB, users just need to install a normal 10440
600mAh 3.7V rechargeable lithium battery, then users could power on the display and do setting
without connect to main power.
Display flip, by press up and down button for more than 3 seconds, the display will flip automatically,
this function is useful to read menu conveniently when device is hanged.
o Connecting the mains cable
Earth must always be connected. Power cables must be approved and comply with the IEC
Standard.
Maximum 3 units can be connected in series
Care and maintenance
The outside of the camera should be cleaned regularly. The lenses must be cleaned to ensure
optimum brightness. If the luminaire is installed in a dusty or smoky environment, regular cleaning
is very important. Unplug the device before carrying out any work!
LUMINA H380 User's Manual Ver. 1.00
19
Page
Publicité
