Publicité
EN
5
/
SETTING OF THE PUMP:
Save water by watering your plants early in the morning or late in the evening (when water
is less likely to evaporate).
The pump will automatically start watering according to the set program.
There are 2 ways to set your plants' watering schedule: automatic or manual.
Frequency
Duration
• AUTOMATIC MODE
1. Press the SELECT button to activate the setting.
2. The LED blinks on the first row (frequency).
Press the SELECT button again to select the desired frequency (between 1h and 72h) or "Week" to
water 1 time per week (the day of the week on which the setting is made).
Press OK to confirm selection.
3. The LED blinks on the second row (duration).
Press the SELECT button to select the desired watering duration (from 1 to 60min).
Press OK button to confirm selection.
Watering starts immediately for the set duration and will then run according to the set values.
The pump records the time as soon as it is switched on.
For the record, note the time at which the device was set.
Watering frequency and/or duration can be changed at any time.
!
Any programming change will affect the start time.
Example 1
I want to water 5 minutes every day. It is 6:30p.m.:
Set the frequency LED to "24". Then the duration LED to "5".
The program starts immediately for 5min, it will do so every day at 6:30p.m. for 5min.
Example 2
I want to water for 1 hour, once a week. It's Tuesday and it's 6.30p.m.:
Set the frequency LED to "Week". Then set the duration LED to "60".
The program starts immediately for 1 hour, it will do so every following Tuesday at 6:30p.m. for 1 hour.
16
Publicité
