Publicité
3
/
INSTALLATION OF THE PUMP:
Solar panel
• BATTERY INSTALLATION
Insert 3 AA NiMH rechargeable batteries into the battery compartment.
Recharge the batteries beforehand or leave the pump exposed to the sun to recharge them.
!
Do not install traditional batteries, only use rechargeable batteries.
Battery indicator:
The OFF indicator (on the control panel) blinks red if the pump is not exposed to
sunlight or if the batteries are not sufficiently charged.
If the indicator blinks red, the pump cannot be programmed.
• SETTING UP THE PUMP
Designed for outdoor use, we recommend placing the pump above the ground, in a very sunny spot.
You can choose between 2 installation options:
Option 1
Open the solar panel flap and place the pump on
a flat surface.
Tank coupling
Plant coupling
Battery compartment
Control panel
Option 2
Hang the pump on a wall, using suitable fasteners
(not supplied).
EN
13
Publicité
