Publicité
EN
4
/
INSTALLATION OF THE KIT:
• FROM THE PUMP TO THE WATER SUPPLY
Using a pair of scissors, cut a
1.
piece of tube to the required
length.
• FROM THE PUMP TO THE PLANTS
On the pump, connect the anti-siphon valve
1.
next to the
valve.
14
On the pump, connect
2.
the tube next to the
symbol.
symbol, then the tube to the
3.
Unwind the tube until you reach the area to
2.
be watered. Cut the tube, connect it to the
junction, then connect the integrated-drippers
tube to the junction.
Install the integrated-drippers tube next to your
3.
plants, using the stake pegs.
Finish the installation with the plug.
Install the F 20x27mm (3/4")
flow connector on the water
supply, then connect the other
end of the tube to the flow
connector's junction.
Publicité
