Publicité
Replace the wick :
To ensure that this radiator burns smoothly, it is essential to use a
genuine radiator wick.
Loosen the 3 fixing nuts and remove the
protective cover. Remove the chimney.
Loosen the 4 fixing nuts and remove the wick
cover. Take care not to lose the gasket.
Turn the adjustment knob anti-clockwise.
Remove the plug by pulling it forwards.
Remove the wick holder and wick from the
appliance. Remove the used wick from the wick
holder. Clean the wick guide, burner cover, etc.
Insert a new bit into the bit holder and secure it
with the clips inside the holder.
Make sure that the wick protrudes the same
length on both sides of the wick holder. Slide the
wick holder onto the wick guide.
Publicité
