Sirius Satellite broadcast service
The Sirius Satellite coverage is only for the United States except Hawaii and Alaska. There
is no Sirius Satellite coverage in Canada. The instruction of Satellite Operation Controls in
the Operating Instructions and Guide will not be applied.
Before Reading these
Instructions
This is the operating guide for Sirius
when connecting to CD player/receiv-
er; model CQ-DP383U (main unit).
Ce)
This can only be controlled through the
main unit.
<=>
This can only be controlled through the
E
remote control unit.
Operations with neither mark can be performed ei-
ther by the main unit or the remote control unit.
~
|
Before Operating
|
Preparations:
e Obtain the Sirius receiver (CR-SRT100).
e Retain the unit's product serial number.
e Register the Sirius satellite program.
Installation and electrical connections:
e Connect the Sirius receiver (CR-SRT100, option)
to the main unit.
Note:
e Refer to the operating instruction of the main unit
for details and contact your nearest Panasonic
Servicenter for service.
|
Sirius Setting
|
(Page 10)
After the Sirius receiver has been connected to
main unit, be absolutely sure to set Sirius setting
to SET ON.
Otherwise, operation will not be
transferred to the Sirius mode.
Preparations:
|
Power on the main unit. (See the-operating instruc-
tions of the main unit.)
Default: SET OFF
@ Press and hold [SEL] for more than 2 seconds.
{Main unit)
{Press and hold.)
z 2 sec.
@ Press {SEL} to select "SIRIUS".
O Turn [VOL] to select "SET ON".
(Press [A] on the remote control unit.)
>
[A] PREU
E
SET ON:
Sirius control mode is selectable as a source.
Note:
e Reter to the operating instruction of the main unit
for details.