Publicité
3. USE AND MAINTENANCE
3.11 On board control function
1
ON/OFF BUTTON: Turn on or turn off the air conditioner
MODE BUTTON: Set up the air conditioner operating mode
2
ELECTRICAL HEAT BUTTON: Turn on or turn off the electrical heat.
3
FAN SPEED BUTTON: Set up the fan speed
4
DOWN BUTTON: Decrease the temperature and time
5
UP BUTTON: Increase the temperature and time
6
HIGH SPEED LED: Signal the high speed working state
7
MIDDLE SPEED LED: Signal the middle speed working state
8
LOW SPEED LED: Signal the low speed working state
9
10
AUTO FAN LED: Signal the automatic fan state
If you select the AUTO speed, the fan speed is according with the room
temperature and setting temperature.
Room temperature-setting temperature＞5 C, high speed;
Room temperature-setting temperature＞3 C, middle speed;
Room temperature-setting temperature＞1 C, low speed.
Temperature display window
11
The display will show both setting temperature and ambient temperature.
After adjusting the setting temperature, the setting temperature will flash
15 minutes on the display, then the display will show the ambient temperature
for 70 seconds. After that, the display will be off until next adjustment.
0
0
0
18
ENGLISH
Publicité
